What are the key points for the daily maintenance of intelligent circuit breakers?

In order to make the operation of the intelligent circuit breaker more smooth, we cannot neglect its maintenance. If you frequently carry out maintenance, its lifespan will increase many times. Why not do it? To ensure its good working condition, maintenance and upkeep need to be continuously strengthened. So, what are the key points of its maintenance?
In terms of maintenance, we should ensure that the air is fresh. If it is humid air or not cleaned properly, the consequences can be very serious. The humid gas decomposes into hydrogen and oxygen mixed gas. This can cause fractures between connection points and, in severe cases, even lead to an explosion of the arc chamber. It will reduce the insulation strength and gradually cause discharge on the surface, making it impossible to touch. If you get an electric shock, the consequences can be unimaginable. Therefore, it is better to be cautious. Also, when painting the pipes, there may be blockages. The circuit may malfunction or even get stuck. All of these are caused by unclean air. The severity varies greatly. Therefore, it is necessary to keep the air clean frequently.
Rubber parts are an important component. They should be replaced regularly because the structure of these parts is very complex and the sealing performance is highly demanding. To ensure that their performance keeps up, it is necessary to replace the rubber parts in a timely manner.
The various components of the air switch need to be inspected regularly to keep them in a good technical condition. Don’t overlook a small component as it might determine the normal operation of the device. For instance, the arc extinguishing chamber requires regular inspection of its springs, dynamic and static contact points, as it undergoes continuous friction. Therefore, if there is an excessive travel, the pressure will gradually decrease. When it becomes too small, it will cause the spring to deform. At that time, it is necessary to replace it in time. The nonlinear resistor needs to be checked for its cleanliness, replace the desiccant inside, and measure the nonlinear film resistance. The main valve needs to be inspected for the size of the piston and valve body to see if it is within the specified range. If not, it needs to be corrected in time. The drive cylinder also needs to be inspected, adjust its buffer zone to ensure the isolating switch, and promptly check its accuracy. Similarly, it is maintained better through maintenance and replacement.
For the daily maintenance of circuit breakers, all we need to do is the above-mentioned few points. We believe it will yield considerable results. Ensuring that the air in the usage environment is fresh, timely replacement of rubber parts, and inspection of small components, etc., are all important steps. All you need to do is spend a little time, and it will help the device reduce troubles and maintain its condition. Maintaining and servicing the device should start from small daily tasks and cannot be ignored.